Intumescent fire protection coating

Typical uses

• Design of fire and thermal protection systems for members
• Projects with defined requirements for the coating system
• Verification on actual structural samples and process

Technical data

System

Water-based synthetic resin

Material type

Intumescent fire protection coating

System matching

Substrate, primer and topcoat system

Verification focus

Thickness, curing and application conditions

Colour

yellow, or to customer request

pH

7.5 ± 0.1

Wet density

1.3 ± 0.1 g/cm³

Non-volatile content

63 ± 5%

Thermal conductivity

≤ 0.15 W/m·K

Composite loss factor

0.11

Application temperature

above 15 °C recommended, ambient relative humidity not above 85%

Drying

24 hours at room temperature; keep ventilation full and continuous during application and curing

Storage

at least 12 months in the sealed original container; keep dry and cool, protect from frost

Packaging

250 kg steel drum (with inner bag)

Application notes

• Confirm suitability against the use of the member and the specific fire requirements; do not judge performance outside the test conditions.
• Remove oil and loose material from the substrate, and first run a small-area application and adhesion check.
• Curing environment and matching process are confirmed by the technical team for the project conditions.