FR5-1200
Water-based fire protection and thermal insulation coating
Fire and thermal
Water-based coating for fire protection and thermal insulation; the protection system is assessed with substrate, thickness and service conditions.
Source
FR5-1200 TDS CV v.230801
Typical uses
- Fire protection of metal members
- Areas needing thermal protection
- Compatibility verification of the material and primer system
Technical data
- System
- Water-based synthetic resin
- Protection type
- Intumescent fire protection coating
- Assessment scope
- Substrate, coating thickness and complete system
- Performance confirmation
- Verified against project conditions and test requirements
- Consistency
- 11 ± 3 cm
- pH
- 7.5 ± 0.1
- Wet density
- 1.3 ± 0.1 g/cm³
- Non-volatile content
- 63 ± 5%
- Thermal conductivity
- ≤ 0.15 W/m·K
- Composite loss factor
- 0.11
Application notes
- Fire performance must be confirmed for the specific substrate, coating thickness and test conditions.
- Keep the substrate clean and oil-free before application, and verify primer and topcoat system compatibility.
- Keep continuous ventilation during application and curing; the exact process is confirmed by the technical team.